TSS HobbiesRC Raceway





© a super cool and creative website
CALL US waiting on new #
General Rules
♦ No Alcohol allowed at the track at ANY time!
♦ No Swearing at ANY time! This is a family track and kids are around!
♦ Children under the age of 15 must be accompanied by an adult at all times.
♦ Track time is $10.00 per person and must be prepaid before a car hits the track.
♦ No Illegal Substances (pot, cocaine, etc.) at the track at ANY time!
♦ No yelling at the corner Marshall's. They didn't wreck, you did!
♦ Pit mats are required at all times.
♦ Taped chaises, buggies must tape shock towers.
♦ If the car came with a gear cover, you must use it.
♦ No cutting the track, no driving backwards on the track, no reverse.
♦ You must Corner Marshall the race following your own race. If for some reason you can not Corner Marshall your race, it is your own responsibly to find someone to marshal for you. Laps will be deducted if you are not at your marshal spot.

Marshall Rules
♦ Corner Marshall's are to pay attention to what is going on in their area, not watch the leader.
♦ Corner Marshall's, PLEASE have hands free so you can flip the cars ASAP.
♦ Marshall's must have closed toe shoes, no flip flops or sandals.
♦ NO gabbing while out Corner Marshalling.
♦ NO cell phones while Corner Marshalling





Class Rules

SPEC SLASH RULES

Out of the box and onto the racetrack! That’s what Slash Spec is all about.

♦ CHASSIS
- Modifications of any type to the chassis plate, lower braces, receiver box, battery brace and related parts are not allowed.
- A Traxxas Slash chassis must be used. Conversions and "LCG" adapters are not allowed.
- Weight may not be added to the chassis.
- The battery must be placed in the battery tray. The foam battery spacer may be placed behind or in front of the battery when using a 6-cell battery pack, or removed when using a 7-cell battery pack. Cutting or otherwise modifying the spacer is not allowed.
- The side nerf bars, front and rear bumpers, skidplates and body mounts may not be removed or modified.
♦ SUSPENSION
- Modifications of any type to the suspension arms, shocks, shock towers, hub carriers and related parts are not allowed.
- When refilled for maintenance, the shocks may be filled with any weight fluid.
- The stock shock springs must be used in their factory positions. Springs may not be shortened or otherwise modified.
- Spring preload may be adjusted using only the supplied spacers. Additional spacers may not be used.
- Front toe-in and front and rear camber may be adjusted within the travel range of the factory turnbuckles and rod ends.
♦ DRIVETRAIN
-Modifications to the gearbox, transmission gears, slipper clutch, driveshafts and bearings are not allowed.
- Must run 18t pinon to a 86 Spur or 19t pinion to a 90t spur gear
- The differential may not be locked or modified in any way.
- Aftermarket gear covers may be fitted.

♦ BODY, WHEELS AND TIRES
-Original equipment Traxxas Slash tires (BFGoodrich, Kumho Road Venture MT, or Slash tread) and wheels must be used, in the standard compound. Tire modifications of any type are NOT allowed.
- S1 soft-compound tires may NOT be used.
- Softening compounds or other traction aids may not be used.
- You can clean the tires with Simple Green and/or Grease lighting Super Clean by using a non abrasive towel.
- A Traxxas Slash body or Traxxas-approved aftermarket short-course body must be used. The body must be trimmed using the factory trim lines. The body must be mounted using the factory body posts.

♦ ELECTRONICS
- The original Traxxas XL-5 speed control and Titan12T motor must be used.
- Aftermarket transmitters and receivers may be used.
- Any type of connector may be used. (example Traxxas High-Current, deens, power pole)
- The speed control's wires may not be shortened or changed.
- The motor's label must be intact. Motor modifications of any type are not allowed. The motor must also have the stock leads (NO DERECT SODERING).
- Piezoelectric gyroscopes or other stability-enhancing electronic devices are not allowed.

♦ TRANSPONDER- If the track uses a transponder-based lap counting system, the transponder must be mounted beneath the Slash body, either on the body itself or on the chassis plate.

♦ BATTERIES
- Racers may use any factory-assembled 6- or 7-cell NiMH battery or 2-cell LiPo battery. NOTE: not all Slash's XL-5 speed controls are equipped with a voltage cutoff. Racers who choose to use LiPo packs are strongly encouraged to install an external cutoff device. Though they are not required.
- Disassembly or modifications to the battery pack are not allowed.
- Matched, Zapped, or otherwise enhanced/modified cells are not allowed.

♦ REPLACEMENT PARTS- Only Traxxas original replacement parts may be used.